POSSIBILITIES FOR DIFFERENTIATING OFFICE PAPER BY FIBER COMPOSITION IN FORENSIC EXAMINATION
DOI:
https://doi.org/10.32782/forensic.science.2026.4.9Keywords:
office paper, fiber composition, cellulose, microscopic examination, selective staining, forensic examinationAbstract
The article examines the possibility of differentiating office paper by fiber composition in forensic examination. The study aimed to determine the possibility of distinguishing paper samples based on the qualitative and quantitative composition of fibers, their attribution to hardwood and softwood cellulose, characteristics of chemical processing, and bleaching. Three office paper samples with a basis weight of 80 g/m² were examined: “Business” (Slovakia), “Double A Premium” (Thailand), and “Svitanok” (Ukraine). Light microscopy, Herzberg stain, Alexander’s stain, a reagent sequence for determining characteristics of the chemical processing of cellulose, and Bright’s stain were applied. Fiber identification was based on a combination of morphological and microchemical characteristics. All samples contained cellulose fibers originating from both hardwood and softwood. The mass fraction of hardwood fibers was 86% in “Business”, 94% in “Double A Premium”, and 78% in “Svitanok”, while the corresponding proportions of softwood fibers were 14%, 6%, and 22%. Differences were established in the characteristics of the chemical processing of cellulose. “Business” contained a combination of hardwood bleached sulfate cellulose and softwood bleached sulfite cellulose; “Double A Premium” contained hardwood and softwood bleached sulfate cellulose; and “Svitanok” demonstrated mixed characteristics of sulfate and sulfite processing. Bright’s stain showed only bleached fibers in “Business” and “Double A Premium”, whereas bleached fibers predominated in “Svitanok”, where individual fibers exhibiting characteristics of unbleached cellulose were additionally detected. The results demonstrate that morphological characte ristics, attribution of fibers to hardwood or softwood cellulose, characteristics of chemical processing and bleaching, and the quantitative ratio of fibers may form a set of differential characteristics for the comparative forensic examination of office paper. These characteristics are not, however, an independent basis for determining a specific manufacturer.
References
1. ДСТУ ISO 9184-1:2010. Напівфабрикати волокнисті, папір та картон. Аналіз складу за волокном. Частина 1. Загальний метод (ISO 9184-1:1990, IDT). Київ : Держспоживстандарт України, 2013.
2. ДСТУ ISO 9184-3:2010. Напівфабрикати волокнисті, папір та картон. Аналіз складу за волокном. Частина 3. Тест на забарвлення реактивом Херцберга (ISO 9184-3:1990, IDT). Київ : Держспоживстандарт України, 2013.
3. Ilvessalo-Pfäffli M.-S. Fiber Atlas: Identification of Papermaking Fibers. Berlin ; Heidelberg ; New York : Springer-Verlag, 1995. XI, 400 p. DOI: https://doi.org/10.1007/978-3-662-07212-7.
4. Plitt T. M. Microscopic Methods Used in Identifying Commercial Fibers. Circular of the National Bureau of Standards C423. Washington : U.S. Government Printing Office, 1939. 30 p. DOI: https://doi.org/10.6028/NBS.CIRC.423.
5. Hubbe M. A., Chandra R. P., Dogu D., van Velzen S. T. J. Analytical Staining of Cellulosic Materials: A Review. BioResources. 2019. Vol. 14, No. 3. P. 7387–7464. DOI: https://doi.org/10.15376/biores.14.3.7387-7464.



